file:///d /sivavacom02/manual-eprom-read.htm (2 of 5) 5:04:16 PMģ When you has finished the file, then select menu ACTION (as the picture below) or click icon on toolbar menu. Programming the IC FLASH Memory 28C,29F,29C040 4 Mbit you have to set the jumber, which locates on letf side of the DIPswitch, to the position 2-3( Default position is 1-2 ). You can check Willem Eprom board connecting by using tab bar Test H/W on button of the panel or using menu Help -> Text Hardware file:///d /sivavacom02/manual-eprom-read.htm (1 of 5) 5:04:16 PMĢ Selecting the IC number that you want to program by using menu DEVICE or click the button For theic type 8-pin,18-pin setting DIPswitch doesn't need, but for the IC type 28-pin, 32-pin you have to set the DIPswitch same as the DIPswitchsetting picture. 1 Willem's EPROM Program Operating Manual ( English language) Using EPROM,EEPROM,FLASH,PIC Program Before put the IC in the 'Willem' board, you have to run software fist for cutting Vdd and Vpp which will supply to EPROM.
